HPI Nitro RS4 3 Mustang RTR-X RTR

HPI Nitro RS4 3 Mustang RTR-X RTR
Item# HPID0943
Availability: Usually ships in 5-7 business days
Currently out of stock.

Item Description:

This is the 1/10 scale glow powered, radio controlled, ready to run HPI Nitro RS4 3 Evo+ with the 1969 Ford Mustang Body.

  • Chassis: 0.098" (2.5mm) 6061 aluminum, gray in color
  • Drive: Four wheel shaft drive
  • Engine: Nitro Star T3.0 3.0cc (.18 cu in) 2.2hp with pull starter ABC cylinder and liner construction-"A"luminum piston,"B"rass cylinder liner that is "C"hrome plated, lightweight aluminum con rod, 2 needle 6.5mm rotary carburetor, 2 stage air filter
  • Exhaust: Dual chamber aluminum tuned pipe, black in color
  • Radio: TF-40 2.4GHz 3-channel with steering and throttle trims, dual rate for steering and charge jack for optional NiCd battery
  • Servos: Two standard size and torque, waterproof Radio Box: Sealed, and removable for easy chassis cleaning
  • Fuel Tank: 2.53oz (75cc), flip top cap
  • Clutch: 2-shoe
  • Transmission: Two-speed, adjustable
  • Ball Bearings: 18 rubber sealed
  • Shocks: Four oil-filled, with coil-over spring
  • Main Gear: 47 and 43 tooth composite construction main gears
  • Clutch bell: 22 teeth and 18 teeth gears that thread onto clutch bell
  • Gearbox: Sealed, front and rear
  • Differentials: Sealed, with metal bevel gears, limited slip front differential
  • Brake: Single disc, fiber construction
  • Tires: D compound X-pattern 1.02" (26mm) wide, 2.5" (65mm) diameter
  • Wheels: 5-spoke Workmeister S1
  • Body: Pre-painted and trimmed with rear wing and decals applied, and extra clear wing
  • Bumper: Front foam
  • Suspension: Four wheel independent double wishbone
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Steering: Bellcrank
  • Servo Saver: Included

  • HPI RS4 3 Evo+ oil-filled shocks, tuned pipe, 3.0cc engine, trimmed and painted polycarbonate body, tires, foam inserts, wheels, decals 2.4GHz 3-ch radio, 8 AA batteries, instructions, glow plug

  • Building and track equipment
  • Fuel: 2-stroke glow fuel with 10%-20% nitromethane, 16% lubricant

  • Vehicle:
    Length: 17.1" (434mm)
    Width: 7.9" (200mm)
    Height: 4" (102mm)
    Weight: 3.85lbs (1745g) approximate
  • Wheelbase:
    10.1" (256mm) (wheels on-center front-to-rear)
    Tread: Front-6.75" (171mm) Rear-7" (178mm) (wheels on-center side to-side)
    Front Track: 7.25" (184mm)
    Rear Track: 7.75" (197mm)
    Ground Clearance: 0.29" (7.5mm)
  • Body:
    Length: 17.6" (448mm)
    Width: 7.5" (190mm)
    Height: 4.13" (105mm)

Recommended age 14 and up.

Please call us for in-store stock availability @ 415-386-2802

We are located at 5150 Geary Blvd. at 16th Ave. in San Francisco, CA - Click here for a map.